Survitec introduces new turn-key service to support shipowner Lay up Requirements

Survitec has introduced a new service aimed at ensuring CO₂ low pressure (LP) firefighting systems are correctly deactivated when ships enter lay-up.

The turn-key CO₂ LP lay-up service, developed in collaboration with a leading European-based shipowner, was introduced two-months-ago following market demand for a solution capable of simplifying decommissioning and recommissioning procedures. 

Survitec has already seen an upswing in demand for the service following a surge in the number of ships temporarily suspending services and deactivating ships due to the lack of trade.

Claude Sada, Chief Operating Officer, Survitec, said:

“Due to the pandemic and the on-going economic uncertainty, we are seeing ro-ro vessels, VLCCs, and large bulk carriers and containerships heading for lay-up, with owners looking to ensure their CO₂ systems are deactivated correctly and safely.”

A CO₂ LP system, typically used in a vessel’s fixed-fire extinguishing arrangement, can only be decommissioned and recommissioned by a specially trained service provider once the Classification Society has granted approval for the system to be deactivated and the tank emptied.

Survitec has Z17 approvals as service suppliers – from various classification societies allowing the company to service maintain a vessel’s multi-branded fire-extinguishing systems, including CO₂ LP systems.

Steven Puis, Survitec Training Manager, Technical Support, said that while cold lay-up procedures are similar to the processes carried out during the periodical service or refilling of the CO₂ system, there are subtle differences.

“In addition to stringent ventilation, gas detection and personnel safety requirements, cooling compressors need to be prepared prior to tank emptying. Once the compressors are safe, the tank must be emptied through the liquid filling line instead of the gas/vapor return line to avoid a rapid drop in pressure and the CO₂ turning into a solid block of ice."

He continued:

“When the tank has been emptied of its liquid content and pressure is maintained at about 10 bar, it avoids the need for any hydro and pressure testing, internal tank cleaning and purging when the system is reactivated. There is no risk of damage caused by humidity or water accumulating inside the tank.”

Jan-Oskar Lid, Survitec’s Global Technical Sales Manager – Fire, Rescue & Safety, furthered:

“The CO₂ LP system must be emptied prior to lay-up since the ship’s generators will be shut down and unable to provide any power to shipboard compressors and refrigeration units. Based on the Survitec deactivation procedures the tank doesn’t have to be opened, inspected, internally cleaned and purged before refilling and reactivation. The safest and most cost-effective way to carry out this work is to move the vessel by tug to a quayside. However, refilling of the CO₂ tank at anchorage is possible with good planning and special arrangements, such as a barge, etc."

With traditional lay-up spots, such as Scotland and Norway, becoming congested with new destinations emerging, Survitec is providing its customers with a list of locations where service engineers with CO₂ LP system capability are available. A minimum of two service engineers can be deployed on a case-by-case basis.

Lid continued:

“We have the expertise and experience to offer a global turn-key solution from preparation and deactivation through to recommissioning."

With shipowners unprepared for the rapid and extended economic crisis the on-going pandemic has created, the shortfall in trade volumes is resulting a need to protect revenues and scale back operations. For many, a cold lay-up is the best way of reducing overheads.

Survitec is currently creating CO₂ LP cold lay-up and reactivation procedures for ten vessels in a prominent ro-ro and PCTC fleet.

About:

Survitec is a global leader in survival and safety solutions to the marine, defence, aviation and offshore markets. Survitec has over 3,000 employees worldwide covering 8 manufacturing facilities, 15 offshore support centres and over 70 owned service stations. It is further supported by a network of over 500 3rd party service stations and distributors. Across its 160-year history, Survitec has remained at the forefront of innovation, design and application engineering and is the trusted name when it comes to critical safety and survival solutions. w: www.survitecgroup.com